Basic Info.
Gender
ABC Cable Accessories
Yojiu Profession
28 Years
Certificate
CE,ISO9001,NFC
Performance
Fireproof,Waterproof
Transport Package
International Export Standard
Product Description
we have several type and kinds of size,the teeth could be aluminium or copper as per your requirement.
1.Piercing connector,simple installation,need not strip the cable coat
2.Moment nut,piercing pressure is constant,keep good electric connection and make no damage to lead.
3.Self-seam frame,wetproff,waterproff and anti-corrosion,extend the using lift of insulated lead and connector
4.Adopted special connecting tablet,apply to joint of CU(AL)AND CU(AL)or CU and AL.
5.Small electric connecting resistance,connecting resistance less than 1.1times of the resistance of branch conductor with the same length.
6.Special insulated case body,resistandce to illumination and environmental againg,the insulation strength can up to 12KV
7.Arc surface design,apply to connection with the same(different)diameter,wide connection scope(0.75mm2-400mm2)
High Quality JBC-3 Three Bolts Low Voltage Electric Insulated Piercing Connector
Insulation Piercing Connector JBC-3 connector is suitable for aluminum and copper conductors and components not losable,
end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made
of tinned brass or copper or aluminum, bolt made of dacromet steel. When tightening the bolts, the teeth of the contact plates
penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of
insulation is avoided.
Product introduction
The insulation piercing clamp is applicable to the new cable T-connection products of small capacity power and
lighting power supply systems. The use of puncture clamp is another cable T-connection mode after the cable
distribution box and pre branch cable. It has the characteristics of more safe and reliable power distribution,
simple installation, waterproof, low environmental requirements, maintenance free, and more economical. It
can be used in low voltage power and lighting distribution lines such as high-rise buildings, civil residences,
street lamp power distribution, outdoor overhead lines, etc. It can be installed in shafts and outdoors.
Structure composition and type selection
The puncture clamp is connected by a screw with a torque screw through two insulation supports separated up
and down. Two pieces of conductors made of special alloy that can contact the conductor at multiple points are
hidden in the insulation support. The puncture clamp is equipped with torque nut and puncture structure. The
torque nut is used to ensure constant contact pressure, ensure good electrical contact, and together with the
puncture structure, make the installation simple and reliable. During installation, it is only necessary to visually
check whether the torque nut is broken, and whether the wire position is appropriate to ensure reliable quality.
After testing, the contact resistance and line insulation resistance meet the requirements of the construction specifications, and the temperature rise at the joint part of the loaded power on test run is normal The use of
the puncture clamp has little impact on the mechanical and electrical properties of the trunk line. Now the
puncture clamp has a complete range of models, which can easily meet the T-connection needs of the trunk
line of ordinary power lines.
Product characteristics
Mechanical property: under the action of wire breaking force, the connector has no crack. Waterproof and insulation
performance: the underwater insulation strength is up to 15KV (medium voltage)/6KV
(low voltage). Temperature rise performance: the temperature rise of connector is lower than that of connecting
wire when large current passes through.
Electrical performance: specially made torque bolt ensures constant puncture pressure and good electrical contact.
Easy operation: puncture structure, no need to cut, no need to peel the insulated wire.
Wide scope of application: applicable to copper copper butt joint, aluminum aluminum butt joint, copper aluminum transition,
and reducing conductor connection: low-voltage (1KV), medium voltage (10KV) cable insulation piercing connector.
They are respectively suitable for aerial cable (insulated, bare wire) branch connection, insulated incoming cable branch
connection, building power distribution system branch connection, street lamp power distribution system, etc. Low voltage
(1KV), medium voltage (10KV) underground power grid (directly buried, cable trench) special cable insulation piercing
connector and accessories. It is mainly used to branch insulated cables in the underground branch box, and is the best
choice for underground engineering of power grid.
Product features
1. The installation space can be ignored.
2. It does not need maintenance and can be installed in narrow spaces such as bridge, box, pipe and cable trench
without occupying effective area.
3. The construction speed is extremely fast: it only takes about 3 minutes for each branch.
4. Save time, labor and expense.
5. Only matching ordinary socket wrench can be used for installation.
6. Insulation puncture connection, waterproof and moisture-proof.
7. It is resistant to tension, distortion, vibration, acid and alkali corrosion.
| Item No. | Conductor Cross Section(mm2) | Bolt Qty. |
| Main | Branch |
| JBC-1 | 35-70 | 6-35 | 1 |
| JBC-2 | 35-150 | 35-150 | 1 |
| JBC-3 | 50-240 | 50-150 | 2 |
FAQ
Q:CAN YOU HELP US IMPROT AND EXPORT?
A:We will have a professional team to serve you.
Q:WHAT'S THE CERTIFICATES DO YOU HAVE?
A:We have certificates of ISO,CE, BV,SGS.
Q:WHAT'S YOUR WARRANTY PERIOD?
A:1 year in general.
Q:CAN YOU DO OEM SERVICE?
A:YES,we can.
Q:WHAT YOU LEAD TIME?
A:Our standard models are in stock ,as for big orders ,it take about 15 days.
Q:CAN YOU PROVIDE FREE SAMPLES?
A:Yes,please contact us to know the sample policy.
Address:
Jiaxi Industrial Zone, Liushi Town, Yueqing City, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
We are one of the biggest manufacturer and exporter of electric power fitting and cable accessory in China. We have more than 31 years experience and we are ISO9001/2000 certified enterprise. Our campany located in Liushe Town, Wenzhou. Liushi is the centr of eelectric appliance in China. It isabout 15Kmfar away from Wenzhou Airport and Railway Station and 104State level highway across through. Therefore the transportation is very convenient.
The total area of our company is over 1500m2. We have more than300 workers include 38 senior and intermcdiate special technical personnel and administraive personnel. We havemore than 200 series and 3000 vareties products. Include cable hardware, circuity hardware, substation hardware, power station hardware, cabletie, heat or cold shrinkable material and other accessory.
Our product has been exported to the Southeast Asia, Africa, Middle East, Europe and America more than 40 countries. In our trade with merchants of various countries, we always adhere to theprinciple of equality and mutual benefit. Welcomecustomers in this line to come over for negotia-tion and cooperation and make contribution to development of electric power.
){kind=link}